What factors should be considered in the purchase of silicon carbide nozzles?

What factors should be considered in the purchase of silicon carbide nozzles?

The quality and efficiency of the use of silicon carbide nozzles are also related to many factors, and the purchase of silicon carbide nozzles needs to consider the system conditions and operating conditions.

07

2023

/

07

What are the factors that affect nozzle efficiency?

What are the factors that affect nozzle efficiency?

The traditional nozzle adopts the structure of cast steel, and the proper swing of the burner silicon carbide nozzle can change the position of the flame center to adjust the reheat steam temperature level; the dense and lean pulverized coal burner can prevent coking and high temperature corrosion in the furnace, and has the characteristics of stable ignition, good low load stability and low NOx emissions.

07

2023

/

07

Comparison of Silicon Carbide Nozzle and Cast Steel Nozzle

Comparison of Silicon Carbide Nozzle and Cast Steel Nozzle

The integral silicon carbide nozzle can effectively prevent fouling and slagging: when the boiler is fired with easy fouling and slagging coal, fouling, coking and slagging are easy to occur at the burner nozzle, thus affecting the combustion performance of the boiler. Because the conventional burner nozzle is made of cast steel, the material will deform in high temperature environment for a long time, resulting in uneven nozzle and eddy current;

07

2023

/

07

Installation of Silicon Carbide Nozzle

Installation of Silicon Carbide Nozzle

There are two ways to install the silicon carbide nozzle, which are fixed and swing. How to arrange the silicon carbide nozzle? On the spring instrument Xiaobian tell you to carry out the nozzle in the installation should pay attention to the following questions:

07

2023

/

07

Discussion on Burner Silicon Carbide Nozzle

Discussion on Burner Silicon Carbide Nozzle

The main function of the burner silicon carbide nozzle is to spray the pulverized coal air mixture (primary air) supplied by the pulverized coal preparation system and the secondary air required for combustion into the furnace at a certain concentration and speed, respectively, to achieve stable ignition and combustion in the suspended state.

07

2023

/

07

Silicon Carbide Nozzle

Silicon Carbide Nozzle

The burner nozzle generally adopts the structure of cast steel, and the proper swing of the burner nozzle can change the position of the flame center to adjust the temperature level of reheat steam; the dense and lean pulverized coal burner can prevent coking and high-temperature corrosion in the furnace, and has stable ignition and good low-load stability.

07

2023

/

07

< 12 >